toys, bicycle grips, pet brushes, steering wheel covers, toothbrushes and other products.
GURAM ® TPE, BPK series materials are based on SBS, milky white or translucent particles, usually used in injection molding, casting and other processing methods. It is very suitable for injection molding products that are individually molded or one-time molded, and it is also very practical for pseudo-adhesive PP products in full or half packages. At the same time, this series of TPE can be made into products with two effects, bright surface and matte surface, which also provides customers with a wider choice of space.
The main advantage
1. Good elasticity 2. High fluidity 3. Fast forming rate 4. High cost performance
Physical properties table
|Test items||testing method||unit||Typical value*|
|hardness||ASTM D-2240||shore A||15A-98A|
|proportion||ASTM D-792||g/cm 3||0.89-1.35|
|Melt Index||ASTM D-1238||g/10min||5-100|
|Elongation at break||ASTMD-412||%||300-800|
Optical fiber tail sleeves, wires, 5G base station accessories, electrical accessories