Welcome!

Take science and technology as the guide
Take honesty as one's duty

banner

NEWS

 

contact us

contact
 Kunshan Kesun Polymer Material Co., Ltd.
 
contact
 No.108, Jinmao Road, Zhoushi Town, Kunshan City, Jiangsu
 
-
PROBLEM

问题列表(收缩)

Categories:
常见问题
2021-01-11 15:07:50
Answer

Carbon neutrality refers to the use of afforestation, energy saving and emission reduction to offset the carbon dioxide emissions generated by itself and achieve "zero emissions" of carbon dioxide. Carbon neutrality is a solution proposed in response to global warming.

     On the 12th, at the United Nations Climate Summit, my country announced that by 2030, China’s carbon dioxide emissions per unit of GDP will be reduced by more than 65% compared to 2005, and the proportion of non-fossil energy in primary energy consumption will reach about 25%, and forest accumulation It will increase by 6 billion cubic meters over 2005. At the United Nations General Assembly on September 22 this year, my country has already proposed to "increase the degree of nationally determined contributions, adopt more powerful policies and measures, strive to reach the peak of carbon dioxide emissions by 2030, and strive to achieve carbon neutrality by 2060." . Two important speeches, two times emphasized that my country should increase its national independent contribution, which reflects my country's policy determination in the direction of promoting carbon peaks and carbon neutrality. In the economic work conference, "Doing a good job in carbon peaking and carbon neutrality" is also one of the key tasks for next year.

     Kexin Polymer adheres to the concept of green environmental protection and responds to the call for energy saving and emission reduction. Research and development actively promote the use and development of non-petroleum sources and PCR (Post-Consumer Recycled) and PIR (Post-Industrial Recycled) raw materials to reduce traditional energy consumption and carbon dioxide emissions. It is expected to launch bio-based TPE, PCR TPE and PIRTPE in the first quarter of 2021 to meet the different needs of downstream customers.

Categories:
常见问题
2021-01-11 15:07:50
Categories:
常见问题
2020-12-31 17:09:59
Answer

  With the advent of autumn, static electricity began to wreak havoc again, feeling like a walking Pikachu, full of electricity. I comb my hair, open the door, take off my clothes, and press the elevator, it will crackle when I shake my hand.

 

   In life, static electricity will bring a lot of troubles. The same is true in production, and the harm to electronic products is particularly serious. Electrostatic adsorption of dust will reduce the insulation resistance of the component and shorten its life. The electric field or current formed by electrostatic discharge will generate heat, causing damage or potential damage to the components, or even destruction. Moreover, the damage caused by static electricity has complicated problems such as concealment, potentiality, randomness, etc., but it is difficult to be detected and the loss caused is huge.

 

   In response to the troubles caused by static electricity to life and production, Kexin Polymer launched the BondFlex ESD permanent antistatic TPE product series. The surface resistivity is E8~E9, which is easy to dye and has good elasticity. At the same time, it can meet the requirements of single injection molding and secondary overmolding. It can eliminate the discharge phenomenon and dust absorption caused by the accumulation of static electricity. It is widely used in antistatic packaging materials, electronic products, dust-free workshop equipment, panels and floors for special occasions, household tools and vacuum cleaner components.

Categories:
常见问题
2020-12-31 17:09:59
Categories:
常见问题
2020-07-22 10:12:46
Answer

By introducing new high cohesive energy density components into the traditional TPEs formulation system, Kexin Polymer makes the solubility parameter of the elastomer similar to that of polyoxymethylene, so that TPE can cover POM through two-shot injection molding. The design of mechanical buckle is no longer needed, which greatly expands the design space.

Categories:
常见问题
2020-07-22 10:12:46
Previous page
1
2
title

CONTACT

TEL:15250155727
FAX:0512-57784279 / 0512-57735886
CON:Mr. Xu
E-MAIL:
kesuntpe@163.com
ADD:
No.108, Jinmao Road, Zhoushi Town,

           Kunshan City, Jiangsu

ewm

WECHAT

TEL:

0512-55173009